AT Cycle 10

🔴 1: Th 10/29, 🟡 3: Th 10/29a massive pulley lab (2)

Today, we'll continue the lab in ↩️ Pivot Interactives called "Finding the Torque of Friction BCF." In this lab, you'll use the ideas of moment of inertia and rotational dynamics to try to find the torque of friction on a spinning solid disk.

Homework: Finish the lab by Sunday, November 1st. Make sure you've put a sticky note on the Jamboard by Thursday, October 29th at 10pm.

🟥 1: F 10/30, 🟨 3: Th 10/29b massive pulley lab (3)

Today, we'll finish the lab in ↩️ Pivot Interactives called "Finding the Torque of Friction BCF." In this lab, you'll use the ideas of moment of inertia and rotational dynamics to try to find the torque of friction on a spinning solid disk. If you finish, work on previous moment of inertia problems.

Homework: Finish the lab by Sunday, November 1st. Make sure you've put a sticky note on the Jamboard by Thursday, October 29th at 10pm.

❤️❗ 1: M 11/2a, 💛 3: M 11/2 massive pulley problems (1)

Pd 1: Quiz on center of mass and moment of inertia

Today, we'll learn how to solve "massive pulley problems" that we started last time. We'll do these problems from Chapter 10:

Support: 49, 50
Required: 51, 53, 54, 55, 56, 69, 71, 98
Enrichment: 57, 87

We'll continue working on these problems next hour.

Homework: Look to finish about half of the required problems above.

📕 1: M 11/2b, 📒❗ 3: T 11/3 massive pulley problems (2)

Pd 3: Quiz on center of mass and moment of inertia

Today, we'll continue to solve "massive pulley problems" that we started last time. We'll do these problems from Chapter 10:

Support: 49, 50
Required: 51, 53, 54, 55, 56, 69, 71, 98
Enrichment: 57, 87